Project Profile: Pioneer Production Plant

The team at Dupont Pioneer’s Toledo Production Plant needed a solution for their roof problems to prevent damage to product inside their warehouse. They hired Kinzler Construction Services to apply spray foam to the ceiling of this 40,000 sq. ft. building, insulating them from the elements and any future worry!

Kinzler Construction Services delivers an industry-leading customer experience. Learn more about our spray foam installation services and contact us today at 888-292-2382 to see if spray foam is the right product for your project.

Pioneer 1
Pioneer 2
Pioneer 3
Pioneer 4

 

Project Profile. Metal Building Insulation

For a couple of years Go-Devil Boats, based in Baton Rouge, Louisiana, had been facing issues with their existing insulation which was falling and causing a mess. High-R Metal Building Solutions came to the table with a cost-effective solution to solve their insulation issue and improve the aesthetics of their facility.

With over 30,000 square feet of area to install, High-R called upon Kinzler Construction Services of Ames, Iowa and Garland and Jones Insulating of Tyler, Texas to attack this project with a high level of experience and professionalism. While installing the new RetroPan system, the High-R crews worked safely around the employees of Go-Devil Boats on a daily basis, and kept up the production rates of both companies.

The project was completed in approximately 5 weeks, coming in on schedule and budget, without any major setbacks. With a satisfied customer and a great looking facility, this is just another success story for the High-R team.

BEFORE:

  • Go-Devil Boats Before 3
  • Go-Devil Boats Before 2
  • Go-Devil Boats Before

AFTER:

  • Go-Devil Boats After 2
  • Go- Devil Boats After 3
  • Go-Devil Boats After

For your project contact High-R at 888-595-2763, www.high-r.com or email us at info@high-r.com.

 

Project Profile. HIGH-R Metal Building Insulation

Marion, North Dakota

Winters in the upper Midwest can be unpredictable which can present a challenge when insulating steel buildings.  A-Line Builders of Fargo was selected as the general contractor and steel building erector for this project and selected us as the subcontractor to complete the insulation scope of this 45,000 ft. metal building.  With winter quickly approaching traditional insulation methods were not ideal so A-Line and Kinzler worked together to set a schedule to get the structure dried out so that we could insulate the buidling from the inside.  Insulating the building from the inside once the structure was dry saved substantial downtime that snow, rain, or ice could have caused.  High-R Metal Building Insulation was installed after filling any condensation prone areas with blown fiberglass.  Then, Kinzler spray foamed around windows, doors, eaves, and gable ends to properly air seal this space.  Since purlin depths ranged from 10″-12″ we were able to achieve R values of R-40 on the ceilings and R-30 on the walls.  A big thanks to A-Line Builders of Fargo for allowing us to help you on this project.  For more information on HIGH-R, visit www.high-r.com

highr

© 2016 Kinzler Construction Services

Contact us for questions/comments